epicsaber.com

EPICSABER

RGB SMOOTH SWING KIT

(1 customer review)

$64.90

SKU: N/A Category:
Hilt support 4holes hilt,3holes hilt,2holes hilt,1hole hilt for button or recharge port
Material High-temperature resistance polycarbonate chassis
Size of chassis  OD 25.4mm, length 185mm (Hilt ID must be 25.6mm at least)
 LED Light  12Watts RGB LED(BETTER NOT TURN ON KIT WIHTOUT INSTALLED INTO HILT )
 Color of chassis  Random
 Color of blade  Infinite colors with thousand kinds of colors
 Battery  3000Mah 18650 3.7V safety battery
 Speake  2-3Watts,4/8 ohm great quality
Features Removable battery,Removable electronics,Pre-power on,Blaster,Lock-up,Flash on Clash,9 sets sound fonts,Volume adjustment,Light effective adjustment,Force,Music
Safety System Battery backwards protect system, Over load system, Over discharge system
Sound fonts Kylo Ren,Darksaber,Fallen order,ESB Graflex,Ben Solo,The Flex,Sith rey,Rey Skywalker,Leia
Upgrading range  Can upgrade into Cree RGB kit, single color kit, FOC single color kit, cross guard kit

USER GUIDE

To wake the lightsaber

Hold down the power button for 1 second. A sound will play and the light ring around the power button will illuminate. The saber is now in awake mode.

Awake mode operation: Pressing the power button will turn the blade on and activate sounds and effects.

When the blade is lit, the power button operates thusly:

– Tap – blaster deflection – Hold 0.5 second,button LED flash 1 time, then release – saber lock-up

– Hold 1 second, button LED flash 2 times, then release to cycle rainbow blade colors. Once the desired color is reached, tap it to set the color.

– Hold 1.5 seconds, button LED flash 3 times, then release to cycle solid blade colors. Once the desired color is reached, tap it to set the color.

(This function has another version: Hold 1.5 seconds, button LED flash 3 times, then release-saber force.

Two versions shipped randomly, don’t accept designated version)

– Hold 2 seconds of power off the blade. Button LED flash 4 times

When the blade is off, the power button operates thusly:

– Holding the power button down for 0.5 seconds, button LED flash 1 time, while the blade is off, but still, in wake mode, let go of the button will select sound volume.

– Holding the power button down for 1 second, button LED flash 2 times, while the blade is off, but still in wake mode, will select a new light effects(stable, unstable, and pulse available).

– Holding the power button down for 1.5 seconds, button LED flash 3 times, while the blade is off, but still in wake mode, will select a new sound font. (9sets available).

– Holding 10 seconds to make the saber sleep. If the saber sits idle for 10 minutes it will also enter deep sleep again.

Sleep mode operation:

When the saber is in deep sleep there will be no lights or sounds to keep power for a long time.

COLOR

BLACK, RED, WHITE, TRANSOARENT

1 review for RGB SMOOTH SWING KIT

    Rishit Mishra
    March 7, 2023
    Thank you very much very good update of the card. With motion control very easy to use. Very good shop.
Add a review
Review now to get coupon!

Your email address will not be published. Required fields are marked *